| |
| SURGITECH |
Manufacturers & Exporters of:
- General Surgical Instruments
- Gynecology Instruments
- Orthopaedic Surgical Instruments
-
Orthopaedic Surgical Implants
We are manufacturing wholesalers and exporters of precision surgical instruments and implants, having served the requirements of the international medical profession since the past decade .. |
|
| Small Fragment Set |
|
|
|
 |
 |
|
|
| ST700.00 Small Fragment Set |
| Contents |
| Instruments |
| ST992.04 |
Drill Bit (S.S.) : 2.5mm |
2 nos. |
| ST003.02 |
Drill Bit (S.S. Quick Coupling End) : 2.5mm |
1 nos. |
| ST992.07 |
Drill Bit (S.S.) 3.5mm |
1 no |
| ST903.02 |
Counter Sink |
1
nos |
| ST203.04 |
Cortical Tap : 3.5mm |
2 no |
| ST203.05 |
Cancellous Tap : 3.5mm |
2 no |
| ST203.06 |
Cancellous Tap : 4mm |
1 no |
| ST703.01 |
Tap Sleeve 3.5mm / Drill Sleeve 2.5mm |
1 no |
| ST403.03 |
Screw Driver : Tip : 2.5mm |
1 no |
| ST013.02 |
Small Depth Gauge |
1 no |
| ST113.02 |
Small Neutral & Load Drill Guide |
1 no |
| ST303.00 |
Tap Handle |
1 no |
|
|
|
General Instruments |
|
| ST813.01 |
Screw Holding Forceps |
1 no |
| ST313.02 |
Bending Iron |
1 Pair |
| ST923.01 |
Self Centering Bone Holding Forceps |
2 no |
| ST133.01 |
Reduction Forceps with Point |
2 no |
| ST033.01 |
Reduction Forceps |
1 no |
| ST253.08-10 |
Small Retractor : 8mm, 10mm (1 each) |
2 no |
| ST653.01 |
Periosteal Elevator |
1 nos. |
|
|
|
|
| Implants |
| Cortical Screws Dia. 4.5mm |
|
| 4 Screws each of 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30 32, 34 & 40mm |
56nos. |
| Cancellous Screw Dia. 3.5mm |
|
| 2 Screws each of 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 40mm |
28 nos. |
| Cancellous Screws Dia. 4mm (Full thread) |
|
| 2 Screws each of 14, 16, 18, 20, 22, 24, 26, 28, 30, 35, 40, 45, 50 & 60mm |
28
nos. |
| Cancellous Screws Dia. 4mm (Short thread) |
|
| 2 Screws each of 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 35, 40, 45 & 50mm |
28 nos. |
| Washers |
6 nos. |
|
|
|
|
|
| Plates |
| One Third Tubular Plate |
|
| 1 Plate each of 2, 3, 7 & 8 Holes |
4
nos. |
| 2 Plate each of 4, 5, 6 Holes |
6 nos. |
| D.C.P. (3.5mm) |
|
| 2 Plates each of 5, 6, 7 & 8 Holes |
8 nos. |
| 1 Plate of 10 Holes |
1 nos. |
| Small T-Plate |
2 nos. |
| K. Wire |
30 nos. |
|
|
| Container with S.S. Trays |
|
|
|
|
|
 |
|
| |
|
